Pet Heat Transfer Film Waterproof Heat Transfer Film for 20L Paint Buckets

Product Description

 

Product Description

The heat transfer film decoration process is a process of heating the heat transfer film at one time to transfer the decorative pattern on the heat transfer onto the surface of the building material to be decorated to form a high-quality decorative film.
During the heat transfer process, the protective layer and the pattern layer are separated from the polyester substrate by the combined action of heat and pressure, and the hot-melt adhesive permanently glues the entire decorative layer to the substrate.
The heat transfer film is made of polyethylene film as the backing paper with a wood grain decorative layer printed on it. The surface is coated with a protective layer, a base color layer, a release layer and a hot melt adhesive layer. By heating the high-temperature silicon roller, the temperature and pressure are applied to the transfer foil, so that the transfer layer composed of the decorative wood grain printing layer, the surface protective layer, and the undercoat layer is separated from the polyethylene and transferred to the surface of the artificial board or furniture parts Above, a decorative surface pattern is formed, and its surface has excellent properties such as wear resistance, heat resistance, light resistance, etc.
The pattern is novel and beautiful, and the color tone is stable. It is a decorative material with a wide range of uses.
 

Features

 

1.It has good mechanical properties, impact strength is 3~5 times that of other films, and good folding resistance.
2.It is resistant to oil, fat, dilute acid, dilute alkali, and most solvents.
3.It has excellent resistance to high and low temperatures. It can be used for a long time within a temperature range of 120°C, andcan withstand high temperatures of 150°C and low temperatures of -70°C in short-term use, and has little effect on its mechanical properties at high and low temperatures.
4. The permeability of gas and water vapor is low, that is, it has excellent gas, water, oil and odor resistance.
5.High transparency, can block ultraviolet rays and good gloss.
6.Non-toxic, tasteless, good hygiene and safety, and can be directly used for food packaging. Because pet film has good stability, uniform tension, and minimal deviation of film thickness, it is most widely used.

 

Specification

Color	CMYK
Feature	Environmental Protection
Transfer Pressure	0.5 mpa
Application	plastic printing&decoration
Place of Origin	Zhejiang, China
Delivery Time	10-15days

 

Our Advantages

1.Environmental protection printing,meet the requierment of international non-toxic standard.
2.Four color process printing design finish in one time,no need for the color register.
3.Simple transfer equipment with vivid printing effect.
4.Strong covering power and good adhesive.
5.High gloss,high image definition,toxic free In the past few years, our company absorbed and digested advanced technologies both
at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of heat transfer printing film for
plastic,pe plastic film, If you are interested in any of our products or would like to discuss a custom order, please feel free to
contact us. We are looking forward to forming successful business relationships with new clients around the world in the near
future.

Products Show

 

 

 

Product Parameters

1. Design (Artwork)
2. Confirm the design & order
We will do all needful work till you confirm the design & order.
3. Plate making(cylinders) It takes about4~7 days
4. Printing the film
Print in big rolls ---drying--- cut into small rolls---quality check,It takes about 3 days,
Glitter(Laser) film needs 5 days more for aluminzing
5. Packaging
Polybag+drying agent+carton
6. Delivery
By sea / by air, it's up to you
7. Payment
Plate making fee & 30% film pay in advance; 70% pay before delivery.

Company Profile

Decai is located in Cangnan,Wezhou,Zhejiang,China.
We are a professional manufacture in heat transfer and IML
technology production since 2005.Our company has
launched heat transfer,rubber roller ,in mold label are used
to all kinds of plastic as ABS,PS, PC, PP,PET,PVC. Widely
applied in household,furniture, office stationery, electrical
products,building decoration materials, cosmetics
packaging, etc.

 

FAQ

 

Q1: Are you a manufacturer?
Yes, we are a manufacturer supply in mold label and heat transfer film more than 20 years. If you want professional packing solutions,please feel free to contact us.
Q2: This is the first time to buy the packaging, not sure how to start, what information I need to provide in order to get a price?
a. Application products
b. Size of the film
c. Design
d. Order quantity
Q3: Can I have sample first?
Yes of course, we will send you samples for testing before you make the order
4.Our six promises
1.We can do the designs according to the customer's requirement
2.We can open customer's own mould as per their requirement
3.We can offer you the high quality & reasonable price
4.We can offer you a good after-sell service
5.Promptly delivery
6.Free samples are available